Strong RC Motors
Brushless Motors, Electronic Speed Controls (ESC's), Servos, Batteries, and Props for RC Planes
Also, Motor Parts, Motor Mounts, Prop Adapters, and Connectors
|
Brushless Motors, Electronic Speed Controls (ESC's), Servos, Batteries, and Props for RC Planes Also, Motor Parts, Motor Mounts, Prop Adapters, and Connectors
|
Web Changes: This is where the most recent changes and additions are logged. If you've visited us before and want to know what's changed, take a look here first.4/18/13 More Props added 12/28/12 New motors, ESC's, Servos, and receivers added. 9/6/12 ESC pictures added for 20A LBEC and 40A SBEC ESC's. Added Nano tech 950 mAh battery 5/31/12 HD servos added. And links to Model Plane Foam added. 3/28/12 Props and batteries added 1/14/12 Blue Wonder Motors and Digital servos added 6/24/10 C20 Pro motors and many props savers added 5/22/10 Servos, ESC's, Connectors, and KEDA Motors added. 4/16/09 SALE....STRONG KITS and parts like Bearing tubes, cans, shafts, bearings, mounts, winding terminators, Magnets and Magnet spacers....and more being blown out! 4/8/09 Komodo closeout---prices slashed on Komodo Motors and Kits 3/8/09 $10 Motor testers are back! 1/2/09 C10's now available in 2100 Kv also 1/2/09 Selected ESC prices reduced 9/29/08 C10's and 2500 Kv C20 motors back in stock 8/26/08 C10 price reduced and Brushless heli motor package added 8/26/08 ELE 10 and 12 A ESC's added to the motors and ESC's page 8/20/08 Dualsky ESC's and Programming cards on close-out 7/18/08 new small ESC's added 7/9/08 2100 Kv C20 motors added. 4/7/08 Motor Kit prices reduced 4/7/08 C10 motors back in stock. These are the perfect motors for brushless Lama heli's. 2/4/08 Servo/Motor Testers are back 1/18/08 New 8 gram Motor added 7/26/07 New Dualsky light weight ESC's added 6/5/07 Shipping increased on Priority Mail and Padded envelope--- Sorry 4/1/07 New Factory built motor added, double 12 arm Stators (257D type) 3/8/07 New 18 mm Kit motors added 2/9/07 New prop adapters and prop savers added 1/29/07 HFM's are no longer offered. The recommended alternative is the KH 2204-11. The 2204 is lighter, has similar performance and better efficiency. 1/23/07 SL upgrade package and parts added. 12/8/06 Dual Stator 257 Kits added 11/1/06 Dualsky ESC's are now in stock. 10/6/06 New factory wound motor added KH2204-11 a "257" 12 arm stator type motor weighs 24 g and is great for Hydro Foams etc. 9/27/06 coming soon Dualsky ESC's. Great ESC's and good value 9/9/06 HFM's are back in stock! 8/3/06 Three new wire sizes added #30, #21.5 and #27.5 These half sizes are hard to find and very handy for getting maximum copper fill needed for best efficiency. 7/25/06 Factory built Komodo twelve arm motors (like the KH257 kits) added. 7/25/06 #20 and 20.5 wire added These make a great 6-8 turn (hot wind) KH 278 motor . 6/20/06 #21 wire added 6/14/06 quality ball bearings to replace Komodo's added 3/28/06 Vented cans are back. 3/21/06 Komodo KH257 12 arm stator motor kits and parts added 2/6/06 Vented cans are back in stock. 2/4/06 Cool Running ESC's are here! 1/30/06 FACTORY BUILT MOTORS added. 1/28/06 Prop adapters
1/27/06 New Aluminum Stick Mounts
12/30/05 Komodo Motor Kits and and Servo Testers arrived. STRONG magnet spacers for these are also now available. 12/08/05 New low cost axial motor
11/7/05 DVD on CDROM Motor Building added 10/16/05 GBx endbells can now be purchased modified for a nice press fit on STRONG shafts. Also vented cans for 22.7 mm stator motors will be available 10/18, order now! 8/24/05 Instructions for all STRONG parts are now online. Check out the Book Of Knowledge on CDROM based motor building. 6/18/05 Vented cans added.
6/14/05 Curved magnets for GBx Motors are finally here. These are the strongest magnets available for GBx motors. They have more coverage (both wider and longer than 5X4X2's) and no can side air gap. Over 64% more magnet material. Now you can build a STRONG GBx motor. 6/14/05 GoBrushless GBx endbells and flux rings added. Note also the STRONG modified GBx endbell equipped with a setscrew and fitted to STRONG (and other 3 mm) shafts. Now you do not need to risk damaging parts pressing endbells on shafts. Use the STRONG modified endbells and the cans and shafts are replaceable. Now, you can make several cans with different magnet setups and run them all in one motor. 6/9/05 New light weight can hubs provide very robust shaft joints. Coming soon, STRONG Vented cans are even lighter than stock cans. 5/31/05 Curved magnets for single 22.7 mm stator motors in standard cans are back in stock (again). These have been sold out twice and I have a list of customers who have been waiting for weeks. I order more each time, but they go fast. Have Fun and build STRONG Motors. 5/16/05 Two new shafts added. Stepped Down shafts for gearboxes and 2 mm pinions, and Plain 50 mm shafts with just an ering groove. 4/15/05 Magnet Spacers for GBx motors and Gear Box Mounts added. 3/30/05 Strong RC Motors is now a GoBrushless dealer. Prices on GoBrushless stators and cans reduced. Suggestions for other GoBrushless products you would like to see available here are welcome. 2/27/05 Returned from vacation. Replies have been sent to each order received while away, Those orders should all be shipped in the next few days 1/27/05 Curved magnets are back in stock, and better than ever. They are now the highest strength available, N50. In addition they are now slightly over 1 mm radial thickness. That means they are over 25% stronger and run with a smaller air gap than the original STRONG curved magnets. 1/26/05 Parts lists for double and single stator motors- link added to "Product List" page 1/23/05 New Winding terminators made on automated equipment arrived. They look great and the price is now just $2. 1-7-05 CNC Parts are Here! New STRONG shafts, Bearing tubes, Firewall Mounts and Can Hubs, all at lower prices. This reduced Setscrew Can and Kit prices also. We have now sold over 1000 ball bearings and have just received a new shipment. New Winding terminators made on automated equipment should be here soon. Bearing tubes for 25 mm stators have been added. More choices and more value for STRONG customers. 11-20-04 Magnet Spacers for curved magnets added 11-18-04 Magnet Spacers for 20 mm stator motors added 11-8-04 Curved magnets added. 11-8-04 Kit prices reduced 10-15-04 Ball Bearing shipment of 1000 parts received, new low price announced. 10-14-04 Light weight setscrew cans and hubs added. These hubs weigh less than 1 g. 10-8-04 Thrust washers added. These tiny spacers are what you need in front of the eclip or to space the can away from the windings. 10-3-04 Magnet spacers now in stock. Great tool for motor builders. 9-24-04 Magnets arrived from the factory. Best magnets you can buy at the best prices you can find. new magnets 9-23 -04 Web site is open for evaluation. Please email comments to don@strongrcmotors.com |
|
Send mail to
don@strongrcmotors.com with
questions or comments about this web site.
|
