Strong RC Motors

Home NEWS SHIPPING

 Brushless motors for RC Planes, Factory built and Kits

Also, Motor Parts, Motor Mounts, Prop Adapters, Electronic Speed Controls (ESC's)

"STRONG" Shafts are custom made 3 mm , hardened 416 stainless steel.  Threaded and plain shafts come with an e-clip.  Threaded shafts also include a stainless steel washer and two stainless steel nuts.   The plain shafts are perfect if you are using a propsaver hub can. The stepped down shaft is intended for use with the STRONG Gear box mount.   The 2 mm end will provide a nice press fit in most 2 mm pinion gears.    These are probably the STRONGest shafts you can buy. 

"STRONG" Prop Adapters use a collet mechanism to grip the shaft and provide a 5 mm threaded section to match up to APC and other props.  Available to fit 3 mm and 1/8" (3.17-3.2 mm) shafts.  They are light weight and run true.

Key Benefits

bulletPerfect fit to bearings and can hubs.
bulletSTRONG and tuff
bulletVery straight and true running

 

Click to enlarge

Pricing

Description SKU # Price  
STRONG 3mm M3X0.5 threaded shaft 60 mm long PS1 was$2.50
Now$1
STRONG 3 mm plain shaft 42 mm long PS2 was$2.00
Now$1
STRONG 3 mm stepped down shaft 50 mm long with 7 mm of 2 mm dia. PS3 was$3.00
Now$1
Prop Adapter for 1/8" (3.17-3.2 mm) shaft
Collet to 5 mm thread
Great for APC Props		 PA32 was$3.50
Now$2
Prop Adapter for 3mm shaft
Collet to 5 mm thread
Great for APC Props		 PA3 was$3.50
Now$2
Prop saver with "wobbly" on one side. Only 1.8 g and great for GWS props under 8"  Available for  3.2 mm shafts PropSW was$3
Now$1
Motor Shaft Diameter
Bullet prop adapter, collet 3mm motor to 4.5 mm prop shaft, just 2.7 g  very nice! PAB3 was4.75
Now$3
Bullet prop adapter, collet 3.2 mm (1/8")motor to 6.2 mm(1/4") shaft, 7.5 g  Great for motors using over 200 W. PAB32 was7.50
Now$4.50

 

Home Up

Send mail to don@strongrcmotors.com with questions or comments about this web site.
Copyright © 2004 Strong RC Motors
Last modified: 02/25/10