Strong RC Motors

Home NEWS SHIPPING

Kits, Parts and Tools for the best CDROM based brushless motors

Komodo Motor Kits are high quality, very complete, and great value.

(Factory built motors are also available.)

Click on images to enlarge.

KH-278 V2 Single Stator  KH-283 V2 Double Stator   KH-257 12 arm stator for LRK

The single stator (278) motor is available in Tube Mount only.   The double stator (283) motor is available with a bearing tube or an End mount bearing carrier.  Both can be built with the shaft extending out either end.    As shown above, the end plates for the KH-283 motors are threaded for a bolt-in replacement of common brushed motors.  Both Kits come with curved magnets, wire, a 1/8" shaft,  Prop Saver and adapters to fit GWS, APC and other common Props., heat shrink tubing, and bullet type M&F connectors.  The 12 arm (257) stator can be built with 10, 14, or 16 magnets and wound using LRK, Distributed LRK or CDROM windings.  This gives a broad range of performance and many combinations to select from to get just the desired performance.  This motor uses thinner stator laminations for improved efficiency and performance, and it will weigh less than 1 Oz. when complete.

Additional information on all Komodo Kits and parts is available on the Komodo website . In addition Build instructions and Performance Data for a wide range of batteries, props, and windings is available on the Komodo website by clicking on the "Tutorial Download" tab on the home page.

Click image to enlarge Description and Komodo #

STRONG SKU#

Price

  
 278 V2 KIT Single stator

 KH278N48MV2

K1

$21
283 V2 KIT Double stator bearing tube type

KH283N48MV2S

K3BT

$25
 283 V2 KIT Double stator End mount

 KH283N48MV2B

K3EM

$25
257 Kit- 12 arm stator motor
build with 10,14 or 16 magnets
use LRK or CDROM windings
21-25 g total weight		 K7 $21
257 Kit- 12 arm Double Stator motor
build with 10,14 or 16 magnets
use LRK or CDROM windings
KH257DN50		 K7D $25.50  
Stator 23.8 mm
for 278 and 283 motors
 SR238660		 KS1 $1.50
Stator 12 arm for 257
SR2204		 KS7 $1.50
Bearing Tube for 278 V2&283 V2S

238BT278V2

 KBT $2.98
Bearing Tube for 257
22BT8MM		 KBT7 $2.98
End Mount Bearing Carrier for 283 V2B

KH283BMC

 KBC $8.28
Bell 278 V2

KH278V2BL

 KB1 $8
Bell 283 V2

KH283V2BL

 KB3 $9.28
Bell 257
KH257SBL		 KB7 $7.98
Shaft for 257, 278 V2 and 283 V2 317MMHSS KS $3.98

Prop Adapter for 3.17 mm shaft
Collet to 5 mm thread
Great for APC Props		 PA32 $3.50

Magnet Spacer for 278 V2

MSK1 $4.00

Magnet Spacer for 283 V2 MSK3 $4.00
Magnet Spacer for 257 MSK7 $4.00
Number of magnets
Replacement ball bearings
1/4" OD 1/8" ID
Replace all Komodo bearings except the front KH-257 bearing		 BBK1 $0.75

 

Home Up

Send mail to don@strongrcmotors.com with questions or comments about this web site.
Copyright © 2004 Strong RC Motors
Last modified: 04/05/08